Meeting Log

Tags: organization
Personhours: 1
Meeting Log April 13, 2019 By Bhanaviya, Ethan, Janavi, Evan, Karina, Justin, Abhi, Jose, BenO, BenB, and Arjun

Meeting Log April 13, 2019

Compete at the REV Scrimmage and do final changes on our robot in build and code before Worlds.

Today's Work Log

picture of agenda
  • Change code presets
  • The code team worked on changing the presets for the hook-servo and the Superman arm to ensure that the hook was low enough to latch and so that superman is low enough to deposit minerals in the lander accurately. They also lowered the range of the intake so that our intake system can pick up more minerals without causing the robot to collapse from the pressure caused by the intake.

  • Get range of servos and lower the elbow shaft
  • The build team lowered the elbow shaft so that it was at the right level to latch and so that it was parallel to the mounting bar. They also used the servo tester to get the range of servos on the hook to ensure that the hook was able to latch on accurately. They also lowered the elbow shaft so that it was at the right level to latch and so that it was parallel to the mounting bar. They also used the servo tester to get the range of servos on the hook to ensure that the hook was able to latch on accurately. Subsequently, they attached the control hub in the place of the REV expansion hub and the phones.

  • Create a business card
  • Finally, we created a template for a new business card. It will be unvealed at Worlds.

Today's Work Log

Team MembersTaskStart TimeDuration
AllPlanning Meeting2:10.10
EthanBusiness Card2:002
JanaviBusiness Card2:002
EvanLower elbow shaft & Attach Control Hub2:002
KarinaLower Elbow Shaft & Servo Range2:002
JustinLower Elbow Shaft & Attach Control Hub 2:002
AbhiCode Presets2:002
JoseLower Ekbow Shaft & Attach Control Hub2:002
Ben OCode Presets2:002
Ben BLower Elbow Shaft & Servo Range2:002
ArjunCode Presets2:002
BhanaviyaLog & Business Card2:002
Date | April 13, 2019