Swerve Drive Experiment

Tags: innovate, design, think, and control
Personhours: 8
Swerve Drive Experiment By Abhi

Task: Consider a Swerve Drive base

During the entire season of Relic Recovery, we saw many robots both in and outside our region that had a swerve drive. As Iron Reign, we never considered a swerve drive in the past but seeing all the robots, I wanted to see if it was maybe possible. One motivation was that I didn't like how slow mechanums were. Swerves generally use traction wheels and create a faster speed than usually can be found with mechanum. Also, it seemed as if swerve could provide the mobility neccessary that a mechanum drive provided. This is why I wanted to consider the possibility of a swerve drive and why I did more investigation.

I first came across the PRINT swerve for FTC by team 9773. They had a very detailed explanation of all the parts and assebly tools. After reading into it more, I decided that the system they created wasn't the best. First, the final cost of the drive train was very expensive; we did not have a very high budget despite help from our sponsors. If this drive train didn't work for some reason after playing with it over the summer or if the chassis didn't make sense to use in Rover Ruckus, we would have almost no money for an alternate drive train since we wanted to presearve Kraken. Also, they parts used by 9773 invovled X-rail rather than extrusion rail from REV. This would cause problems in the future as we wold need to redesign the REVolution system for X-rail. In the end, I decided this was not worth it to pursue.

After further investigation, I found a chassis by team 9048. The swerve they developed looked like a more feasible option. By using REV rail and many of the parts we had, I thought this would be a possible prototype for Iron Reign. Because they didn't have a parts list, we had the find the rough estimate of cost from the REV and Andymark websites. Upon further analysis, we realized that the cost, though cheaper than the chassis of 9773, would still be a considerable chunk of our budget. But I am still motivated to find a way to make this happen.

Next Steps

Possibly scavenge for parts in the house and Robodojo to make swerve modules.

Date | June 2, 2018